Added:
- Class folder 'Timing Recovery' with different timing recoveries - Minimal example for the timing recovery on the FSO data - New evaluation scripts in the FSO project folder
This commit is contained in:
magf
@@ -0,0 +1,207 @@
|
||||
function BER_value = first_analysis_ber(current, power, num_pf_coeff, taps_ffe, taps_dfe, M, trlength, eq_method)
|
||||
%%
|
||||
close all
|
||||
|
||||
%%
|
||||
base = "C:\Users\magf\Desktop\Desktop\MATLAB-Zeugs\FSO Equalizer\FSO_FP_QCL_60umUTC\";
|
||||
mode = 0; %0 oder 1
|
||||
% M = 2;
|
||||
|
||||
all_files = dir(fullfile(base, "**/*.mat"));
|
||||
|
||||
if M == 2
|
||||
tx_data_path = fullfile(base, "14G_PAM2\tx_info\tx_info_PAM2_14Gbd0.75RRC.mat");
|
||||
filename = fullfile(base, "14G_PAM2\M=2_Rs=1.4e10_Fs=8e10_I=" + current + "mA_RoP=" + power + "mW_L=31m_PS=RRC_rolloff=0.75_Mode=Rise.mat");
|
||||
elseif M == 4
|
||||
tx_data_path = fullfile(base, "6G_PAM4\tx_info\tx_info_PAM4_6Gbd0.6RRC.mat");
|
||||
filename = fullfile(base, "6G_PAM4\M=4_Rs=6e9_Fs=8e10_I=" + current + "mA_RoP=" + power + "mW_L=31m_PS=RRC_rolloff=0.6_Mode=Rise.mat");
|
||||
end
|
||||
|
||||
if mode == 1
|
||||
[f, p] = uigetfile(fullfile(base, "**/*.mat"));
|
||||
if f~=0
|
||||
filename = fullfile(p,f);
|
||||
end
|
||||
end
|
||||
|
||||
tx_data = load(tx_data_path);
|
||||
datas = load(filename);
|
||||
|
||||
%%
|
||||
str = filename;
|
||||
M_ = str2double(regexp(str, 'M=([^_]+)', 'tokens', 'once'));
|
||||
assert(M==M_);
|
||||
fsym = str2double(regexp(str, 'Rs=([^_]+)', 'tokens', 'once'));
|
||||
fs = str2double(regexp(str, 'Fs=([^_]+)', 'tokens', 'once'));
|
||||
I = sscanf(char(regexp(str, 'I=([^_]+)', 'tokens', 'once')), '%f');
|
||||
rop = sscanf(char(regexp(str, 'RoP=([^_]+)', 'tokens', 'once')), '%f');
|
||||
L = sscanf(char(regexp(str, 'L=([^_]+)', 'tokens', 'once')), '%f');
|
||||
pulseshape = string( regexp(str, 'PS=([^_]+)', 'tokens', 'once'));
|
||||
rolloff = str2double(regexp(str, 'rolloff=([^_]+)', 'tokens', 'once'));
|
||||
mode = string( regexp(str, 'Mode=([^\.]+)', 'tokens', 'once'));
|
||||
|
||||
%%
|
||||
% Tx data
|
||||
|
||||
Bits = Informationsignal(tx_data.tx_data,"fs",fsym);
|
||||
Symbols = Informationsignal(real(tx_data.tx_PAM_sym),"fs",fsym);
|
||||
|
||||
mapping_style = M==4; % Pam2 is like move-it; PAM-4 is different, same mapping like ETH peopled used in Zurich... hence the "eth_style" argument here and there
|
||||
PM = PAMmapper(M,0,"eth_style",mapping_style); % one should rename "eth style" as this is simply a different mapping scheme
|
||||
|
||||
Symbols_ = PM.map(Bits) .* PM.scaling;
|
||||
assert(isequal(Symbols.signal,Symbols_.signal));
|
||||
|
||||
Bits_ = PM.demap(Symbols);
|
||||
[bits,errors,ber,errorIndice] = calc_ber(Bits_.signal,Bits.signal);
|
||||
assert(ber == 0);
|
||||
|
||||
%% For comparison, apply pulsef on Tx Symbols
|
||||
Pform = Pulseformer("fsym",fsym,"fdac",fs,"pulse","rrc","pulselength",16,"alpha",rolloff);
|
||||
Digi_sig_compare = Pform.process(Symbols);
|
||||
MF = Pulseformer("fsym",fsym,"fdac",2*fsym,"pulse","rrc","pulselength",16,"alpha",rolloff);
|
||||
Rx_sig_compare = MF.process(Digi_sig_compare);
|
||||
|
||||
%%
|
||||
|
||||
% Rx Data
|
||||
traceData = datas.tr.lastData(2).trace.ch3;
|
||||
|
||||
%FYI: Voltage=(RawData−YReference)×YIncrement+YOrigin
|
||||
scoperead_volts = (traceData.RawData - traceData.YReference) * traceData.YIncrement + traceData.YOrigin;
|
||||
demystified = isequal(traceData.YData,scoperead_volts);
|
||||
assert(demystified);
|
||||
|
||||
Scope_sig = Electricalsignal(traceData.YData,"fs",fs);
|
||||
|
||||
Scope_sig.plot("displayname",'raw','fignum',100);
|
||||
Scope_sig.spectrum("displayname",'raw','fignum',101)
|
||||
|
||||
Kov = 14;
|
||||
|
||||
Scope_sig = Scope_sig.resample('fs_in', fs, 'fs_out', Kov*fsym);
|
||||
|
||||
% 1) matched filter
|
||||
% pulse is symmetric, hence we can use pulsef firectly as matched filter.
|
||||
% It feels off (bit I think correct) that the fsym is now the output freq.!!
|
||||
% -> output 2 sps to omit timing recovery!?
|
||||
Matched_Filter = Pulseformer("fsym",fsym,"fdac",Kov*fsym,"pulse","rrc","pulselength",16,"alpha",rolloff,"matched",1);
|
||||
Rx_matched = Matched_Filter.process(Scope_sig);
|
||||
Rx_matched.spectrum("displayname",'Signal after matched filter','fignum',1);
|
||||
|
||||
% timing sync -> at this point we still have no symbol timing recovery, we
|
||||
% try to do this with 2sps EQ!
|
||||
[~,Rx_synced_cell,inverted,sequenceFound,sequenceStarts] = Rx_matched.tsynch("reference", Symbols, "fs_ref", fsym, "debug_plots", 1);
|
||||
Rx_matched_1 = Rx_synced_cell{1};
|
||||
|
||||
% Rx_Time_Rec = Rx_matched;
|
||||
% Rx_Time_Rec = Timing_Recovery_Move_It('f_sim', 28e9, 'gamma', 0.1).process(Rx_matched_1);
|
||||
|
||||
Time_Rec = 1;
|
||||
if Time_Rec
|
||||
Rx_Time_Rec = MaxVar_Timing_Recovery('mode',0,'fsym',fsym,'fadc',Kov*fsym,'num_tau',Kov*128,'sps',Kov,'comp_signal',0,'comp_mode',0).process(Rx_matched_1);
|
||||
sps = 1;
|
||||
else
|
||||
sps = Kov;
|
||||
end
|
||||
Rx_Time_Rec.fs = fsym;
|
||||
|
||||
% Rx_Time_Rec.signal = resample(Rx_Time_Rec.signal, 12e9, 6e9);
|
||||
|
||||
% Rx_matched_1.plot("fignum",231231)
|
||||
% Rx_Time_Rec.plot("fignum",231231)
|
||||
|
||||
%% not working..
|
||||
Rx_synced = Rx_Time_Rec;
|
||||
% Rx_synced = Rx_synced_cell{1};
|
||||
len_tr = trlength;
|
||||
mu_ffe1 = 0.0001;
|
||||
mu_ffe2 = 0.0008;
|
||||
mu_ffe3 = 0.001;
|
||||
mu_dc = 0.004;
|
||||
mu_ffe = [mu_ffe1 mu_ffe3 mu_ffe3];
|
||||
mu_dfe = 0.0004;
|
||||
duob_mode = db_mode.no_db;
|
||||
|
||||
Rx_synced.plot("displayname",'RX: Matched+Sync+2sps','fignum',103);
|
||||
Rx_synced.spectrum("displayname",'RX: Matched+Sync+2sps','fignum',104);
|
||||
|
||||
Digi_sig_compare.normalize("mode","rms").spectrum("displayname",'Tx: RC-shaped','fignum',1,'normalizeTo0dB',1);
|
||||
Rx_sig_compare.normalize("mode","rms").spectrum("displayname",'Tx: RC-shaped + matched filtered ','fignum',1,'normalizeTo0dB',1);
|
||||
Rx_synced.normalize("mode","rms").spectrum("displayname",'RX: matched filtered + synced','fignum',1,'normalizeTo0dB',1);
|
||||
|
||||
if M == 2
|
||||
ber_in_paper = 10^(-2.6); %fig 3a) 4 Gb/s MWIR FSO Transmission using Directly Modulated QCL and an Uncooled UTC-PD at Room-Temperature
|
||||
elseif M == 4
|
||||
ber_in_paper = 10^(-2.5);
|
||||
end
|
||||
|
||||
if eq_method == 1
|
||||
|
||||
%% -------------------- FFE --------------------
|
||||
% requires some more digging what is going on :-)
|
||||
eq_ffe = EQ("Ne",[500, 0, 0],"Nb",[0,0,0], ...
|
||||
"training_length",len_tr,"training_loops",5,"dd_loops",5, ...
|
||||
"K",sps,"DCmu",mu_dc,"DDmu",[mu_ffe mu_dfe],"DFEmu",0.005, ...
|
||||
"FFEmu",0,"plotfinal",0,"ideal_dfe",1);
|
||||
|
||||
ffe_results = ffe(eq_ffe,M,Rx_synced,Symbols,Bits, ...
|
||||
"precode_mode",duob_mode,'showAnalysis',0,"postFFE",[], ...
|
||||
"eth_style_symbol_mapping",mapping_style);
|
||||
|
||||
% ffe_results.metrics.print
|
||||
fprintf('My EQ: %.1e \n',ffe_results.metrics.BER);
|
||||
fprintf('Paper: %.1e \n \n',ber_in_paper);
|
||||
BER_value = ffe_results.metrics.BER;
|
||||
|
||||
elseif eq_method == 2
|
||||
|
||||
%% -------------------- VNLE + MLSE --------------------
|
||||
|
||||
pf_ncoeffs = num_pf_coeff;
|
||||
eq_v = EQ("Ne",taps_ffe,"Nb",taps_dfe, ...
|
||||
"training_length",len_tr,"training_loops",5,"dd_loops",5, ...
|
||||
"K",sps,"DCmu",mu_dc,"DDmu",[mu_ffe mu_dfe],"DFEmu",0.005, ...
|
||||
"FFEmu",0,"plotfinal",0,"ideal_dfe",1);
|
||||
pf_ = Postfilter("ncoeff",pf_ncoeffs,"useBurg",1);
|
||||
mlse_ = MLSE("duobinary_output",0,'M',M,'trellis_states',PAMmapper(M,0,"eth_style",mapping_style).levels);
|
||||
|
||||
[vnle_results, mlse_results] = vnle_postfilter_mlse(eq_v, pf_, mlse_, M, Rx_synced, Symbols, Bits, ...
|
||||
"precode_mode", duob_mode, 'showAnalysis', 1, "postFFE", [], "eth_style_symbol_mapping", mapping_style);
|
||||
|
||||
mlse_results.metrics.print
|
||||
fprintf('My EQ: %.1e \n',mlse_results.metrics.BER);
|
||||
fprintf('Paper: %.1e \n \n',ber_in_paper);
|
||||
BER_value = mlse_results.metrics.BER;
|
||||
|
||||
elseif eq_method == 3
|
||||
|
||||
%% -------------------- DB target --------------------
|
||||
mlse_db_ = MLSE("DIR",[1,1],"duobinary_output",0,"M",M,'trellis_states',PAMmapper(M,0).levels);
|
||||
|
||||
eq_ = EQ("Ne",taps_ffe,"Nb",taps_dfe,"training_length",len_tr,"training_loops",5,"dd_loops",5, ...
|
||||
"K",sps,"DCmu",mu_dc,"DDmu",[mu_ffe mu_dfe],"DFEmu",0.005,"FFEmu",0,"plotfinal",0,"ideal_dfe",1);
|
||||
|
||||
dbt_results = duobinary_target(eq_,mlse_db_, M, Rx_synced, Symbols, Bits, ...
|
||||
"precode_mode", duob_mode, 'showAnalysis', 0, "postFFE", [],"eth_style_symbol_mapping",mapping_style);
|
||||
|
||||
dbt_results.metrics.print("description",'Duobinary');
|
||||
fprintf('My EQ: %.1e \n',dbt_results.metrics.BER);
|
||||
fprintf('Paper: %.1e \n \n',ber_in_paper);
|
||||
BER_value = dbt_results.metrics.BER;
|
||||
|
||||
elseif eq_method == 4
|
||||
|
||||
%% -------------------- ML-based MLSE (L=2) --------------------
|
||||
ml_mlse_equalizer = ML_MLSE("epochs_tr",150,"epochs_dd",1, ...
|
||||
"len_tr",length(Rx_synced),"mu_dd",0.03,"mu_tr",0.03,"order",80,"sps",1, ...
|
||||
"traceback_depth",256,"L",1,"delta",4,"adaptive_mu",0);
|
||||
|
||||
[ml_mlse_results] = ml_mlse(ml_mlse_equalizer, M, Rx_synced, Symbols, Bits,"precode_mode",duob_mode,"eth_style_symbol_mapping",mapping_style);
|
||||
fprintf('ML-based MLSE:\n');
|
||||
fprintf('My EQ: %.1e \n',ml_mlse_results.metrics.BER);
|
||||
fprintf('Paper: %.1e \n \n',ber_in_paper);
|
||||
BER_value = ml_mlse_results.metrics.BER;
|
||||
|
||||
end
|
||||
end
|
||||
Reference in New Issue
Block a user