005e821131
- Class folder 'Timing Recovery' with different timing recoveries - Minimal example for the timing recovery on the FSO data - New evaluation scripts in the FSO project folder
190 lines
9.1 KiB
Matlab
190 lines
9.1 KiB
Matlab
function BER_value = first_analysis_2(taps_ffe, taps_dfe, trlen, trloops, ddloops, K_FFE, DCmu, DDmu, DFEmu, FFEmu, plot_final, idealdfe, num_pf_coeffs, damp_factor, norm_loop_bw, det_gain)
|
||
%%
|
||
base = "C:\Users\magf\Desktop\Desktop\MATLAB-Zeugs\FSO Equalizer\FSO_FP_QCL_60umUTC\";
|
||
mode = 0; %0 oder 1
|
||
M = 2;
|
||
|
||
all_files = dir(fullfile(base, "**/*.mat"));
|
||
|
||
if M == 2
|
||
tx_data_path = fullfile(base, "14G_PAM2\tx_info\tx_info_PAM2_14Gbd0.75RRC.mat");
|
||
filename = fullfile(base, "14G_PAM2\M=2_Rs=1.4e10_Fs=8e10_I=265mA_RoP=46.3mW_L=31m_PS=RRC_rolloff=0.75_Mode=Rise.mat");
|
||
elseif M == 4
|
||
tx_data_path = fullfile(base, "6G_PAM4\tx_info\tx_info_PAM4_6Gbd0.6RRC.mat");
|
||
filename = fullfile(base, "6G_PAM4\M=4_Rs=6e9_Fs=8e10_I=255mA_RoP=42.3mW_L=31m_PS=RRC_rolloff=0.6_Mode=Rise.mat");
|
||
end
|
||
|
||
if mode == 1
|
||
[f, p] = uigetfile(fullfile(base, "**/*.mat"));
|
||
if f~=0
|
||
filename = fullfile(p,f);
|
||
end
|
||
end
|
||
|
||
tx_data = load(tx_data_path);
|
||
datas = load(filename);
|
||
|
||
%%
|
||
str = filename;
|
||
M_ = str2double(regexp(str, 'M=([^_]+)', 'tokens', 'once'));
|
||
assert(M==M_);
|
||
fsym = str2double(regexp(str, 'Rs=([^_]+)', 'tokens', 'once'));
|
||
fs = str2double(regexp(str, 'Fs=([^_]+)', 'tokens', 'once'));
|
||
I = sscanf(char(regexp(str, 'I=([^_]+)', 'tokens', 'once')), '%f');
|
||
rop = sscanf(char(regexp(str, 'RoP=([^_]+)', 'tokens', 'once')), '%f');
|
||
L = sscanf(char(regexp(str, 'L=([^_]+)', 'tokens', 'once')), '%f');
|
||
pulseshape = string( regexp(str, 'PS=([^_]+)', 'tokens', 'once'));
|
||
rolloff = str2double(regexp(str, 'rolloff=([^_]+)', 'tokens', 'once'));
|
||
mode = string( regexp(str, 'Mode=([^\.]+)', 'tokens', 'once'));
|
||
|
||
%%
|
||
% Tx data
|
||
|
||
Bits = Informationsignal(tx_data.tx_data,"fs",fsym);
|
||
Symbols = Informationsignal(real(tx_data.tx_PAM_sym),"fs",fsym);
|
||
|
||
mapping_style = M==4; % Pam2 is like move-it; PAM-4 is different, same mapping like ETH peopled used in Zurich... hence the "eth_style" argument here and there
|
||
PM = PAMmapper(M,0,"eth_style",mapping_style); % one should rename "eth style" as this is simply a different mapping scheme
|
||
|
||
Symbols_ = PM.map(Bits) .* PM.scaling;
|
||
assert(isequal(Symbols.signal,Symbols_.signal));
|
||
|
||
Bits_ = PM.demap(Symbols);
|
||
[bits,errors,ber,errorIndice] = calc_ber(Bits_.signal,Bits.signal);
|
||
assert(ber == 0);
|
||
|
||
%% For comparison, apply pulsef on Tx Symbols
|
||
Pform = Pulseformer("fsym",fsym,"fdac",fs,"pulse","rc","pulselength",16,"alpha",rolloff);
|
||
Digi_sig_compare = Pform.process(Symbols);
|
||
MF = Pulseformer("fsym",fsym,"fdac",2*fsym,"pulse","rrc","pulselength",16,"alpha",rolloff);
|
||
Rx_sig_compare = MF.process(Digi_sig_compare);
|
||
|
||
%%
|
||
|
||
% Rx Data
|
||
traceData = datas.tr.lastData(2).trace.ch3;
|
||
|
||
%FYI: Voltage=(RawData−YReference)×YIncrement+YOrigin
|
||
scoperead_volts = (traceData.RawData - traceData.YReference) * traceData.YIncrement + traceData.YOrigin;
|
||
demystified = isequal(traceData.YData,scoperead_volts);
|
||
assert(demystified);
|
||
|
||
Scope_sig = Electricalsignal(traceData.YData,"fs",fs);
|
||
|
||
Scope_sig.plot("displayname",'raw','fignum',100);
|
||
Scope_sig.spectrum("displayname",'raw','fignum',101)
|
||
|
||
% 1) matched filter
|
||
% pulse is symmetric, hence we can use pulsef firectly as matched filter.
|
||
% It feels off (bit I think correct) that the fsym is now the output freq.!!
|
||
% -> output 2 sps to omit timing recovery!?
|
||
Matched_Filter = Pulseformer("fsym",fsym,"fdac",2*fsym,"pulse","rrc","pulselength",16,"alpha",rolloff,"matched",1);
|
||
Rx_matched = Matched_Filter.process(Scope_sig);
|
||
Rx_matched.spectrum("displayname",'Signal after matched filter','fignum',1);
|
||
|
||
% timing sync -> at this point we still have no symbol timing recovery, we
|
||
% try to do this with 2sps EQ!
|
||
[~,Rx_synced_cell,inverted,sequenceFound,sequenceStarts] = Rx_matched.tsynch("reference", Symbols, "fs_ref", fsym, "debug_plots", 1);
|
||
Rx_matched_1 = Rx_synced_cell{1};
|
||
|
||
% Rx_Time_Rec = Rx_matched;
|
||
[Rx_Time_Rec, Timing_Error] = Timing_Recovery("modulation", 'PAM/PSK/QAM', "timing_error_detector",'Gardner (non-data-aided)','sps',2, ...
|
||
'damping_factor',damp_factor,'normalized_loop_bandwidth',norm_loop_bw,'detector_gain',det_gain).process(Rx_matched_1);
|
||
figure;plot(Timing_Error);
|
||
% Rx_Time_Rec.signal = resample(Rx_Time_Rec.signal, 28e9, 14e9);
|
||
|
||
%% not working..
|
||
Rx_synced = Rx_Time_Rec;
|
||
Rx_synced.fs = 14e9;
|
||
% Rx_synced = Rx_synced_cell{1};
|
||
% len_tr = trlen;
|
||
% mu_ffe1 = mu_ffe_values(1);
|
||
% mu_ffe2 = mu_ffe_values(2);
|
||
% mu_ffe3 = mu_ffe_values(3);
|
||
% mu_dc = 0.005;
|
||
% mu_ffe = [mu_ffe1 mu_ffe3 mu_ffe3];
|
||
% mu_dfe = mu_dfe_values;
|
||
duob_mode = db_mode.no_db;
|
||
|
||
Rx_synced.plot("displayname",'RX: Matched+Sync+2sps','fignum',2);
|
||
|
||
Digi_sig_compare.normalize("mode","rms").spectrum("displayname",'Tx: RC-shaped','fignum',1,'normalizeTo0dB',0);
|
||
Rx_sig_compare.normalize("mode","rms").spectrum("displayname",'Tx: RC-shaped + matched filtered ','fignum',1,'normalizeTo0dB',0);
|
||
Rx_synced.normalize("mode","rms").spectrum("displayname",'RX: matched filtered + synced','fignum',1,'normalizeTo0dB',0);
|
||
|
||
if M == 2
|
||
ber_in_paper = 10^(-2.6); %fig 3a) 4 Gb/s MWIR FSO Transmission using Directly Modulated QCL and an Uncooled UTC-PD at Room-Temperature
|
||
elseif M == 4
|
||
ber_in_paper = 10^(-2.5);
|
||
end
|
||
|
||
%% -------------------- FFE --------------------
|
||
% % requires some more digging what is going on :-)
|
||
% eq_ffe = EQ("Ne",taps_ffe,"Nb",taps_dfe, ...
|
||
% "training_length",trlen,"training_loops",trloops,"dd_loops",ddloops, ...
|
||
% "K",K_FFE,"DCmu",DCmu,"DDmu",DDmu,"DFEmu",DFEmu, ...
|
||
% "FFEmu",FFEmu,"plotfinal",plot_final,"ideal_dfe",idealdfe);
|
||
%
|
||
% ffe_results = ffe(eq_ffe,M,Rx_synced,Symbols,Bits, ...
|
||
% "precode_mode",duob_mode,'showAnalysis',0,"postFFE",[], ...
|
||
% "eth_style_symbol_mapping",mapping_style);
|
||
%
|
||
% % ffe_results.metrics.print
|
||
% fprintf('My EQ: %.1e \n',ffe_results.metrics.BER);
|
||
% fprintf('Paper: %.1e \n \n',ber_in_paper);
|
||
% BER_value = ffe_results.metrics.BER;
|
||
|
||
%% -------------------- VNLE + MLSE --------------------
|
||
|
||
pf_ncoeffs = num_pf_coeffs;
|
||
eq_v = EQ("Ne",taps_ffe,"Nb",taps_dfe, ...
|
||
"training_length",trlen,"training_loops",trloops,"dd_loops",ddloops, ...
|
||
"K",K_FFE,"DCmu",DCmu,"DDmu",DDmu,"DFEmu",DFEmu, ...
|
||
"FFEmu",FFEmu,"plotfinal",plot_final,"ideal_dfe",idealdfe);
|
||
pf_ = Postfilter("ncoeff",pf_ncoeffs,"useBurg",1);
|
||
mlse_ = MLSE("duobinary_output",0,'M',M,'trellis_states',PAMmapper(M,0,"eth_style",mapping_style).levels);
|
||
|
||
[vnle_results, mlse_results] = vnle_postfilter_mlse(eq_v, pf_, mlse_, M, Rx_synced, Symbols, Bits, ...
|
||
"precode_mode", duob_mode, 'showAnalysis', 1, "postFFE", [], "eth_style_symbol_mapping", mapping_style);
|
||
|
||
mlse_results.metrics.print
|
||
fprintf('My EQ: %.1e \n',mlse_results.metrics.BER);
|
||
fprintf('Paper: %.1e \n \n',ber_in_paper);
|
||
BER_value = mlse_results.metrics.BER;
|
||
|
||
%% -------------------- DB target --------------------
|
||
% mlse_db_ = MLSE("DIR",[1,1],"duobinary_output",0,"M",M,'trellis_states',PAMmapper(M,0).levels);
|
||
%
|
||
% eq_ = EQ("Ne",taps_ffe,"Nb",taps_dfe, ...
|
||
% "training_length",trlen,"training_loops",trloops,"dd_loops",ddloops, ...
|
||
% "K",K_FFE,"DCmu",DCmu,"DDmu",DDmu,"DFEmu",DFEmu, ...
|
||
% "FFEmu",FFEmu,"plotfinal",plot_final,"ideal_dfe",idealdfe);
|
||
%
|
||
% dbt_results = duobinary_target(eq_,mlse_db_, M, Rx_synced, Symbols, Bits, ...
|
||
% "precode_mode", duob_mode, 'showAnalysis', 0, "postFFE", [],"eth_style_symbol_mapping",mapping_style);
|
||
%
|
||
% dbt_results.metrics.print("description",'Duobinary');
|
||
% mlse_results.metrics.print
|
||
% fprintf('My EQ: %.1e \n',dbt_results.metrics.BER);
|
||
% fprintf('Paper: %.1e \n \n',ber_in_paper);
|
||
|
||
%% -------------------- ML-based MLSE (L=2) --------------------
|
||
% ml_mlse_equalizer = ML_MLSE("epochs_tr",100,"epochs_dd",1, ...
|
||
% "len_tr",length(Rx_synced)/2,"mu_dd",0.03,"mu_tr",0.03,"order",30,"sps",1, ...
|
||
% "traceback_depth",256,"L",2,"delta",10,"adaptive_mu",0);
|
||
%
|
||
% [ml_mlse_results] = ml_mlse(ml_mlse_equalizer, M, Rx_synced, Symbols, Bits,"precode_mode",duob_mode,"eth_style_symbol_mapping",mapping_style);
|
||
% fprintf('ML-based MLSE:');
|
||
% fprintf('My EQ: %.1e \n',ml_mlse_results.metrics.BER);
|
||
% fprintf('Paper: %.1e \n \n',ber_in_paper);
|
||
%
|
||
% % -------------------- Post-FFE --------------------
|
||
% eq_post = FFE("epochs_tr",5,"epochs_dd",5,"len_tr",len_tr,"mu_dd",1e-4,"mu_tr",0,"order",1001,"sps",1,"decide",0);
|
||
% post_ffe_results = ffe(eq_ffe,M,Rx_synced,Symbols,Bits, ...
|
||
% "precode_mode",duob_mode,'showAnalysis',0,"postFFE",[], ...
|
||
% "eth_style_symbol_mapping",mapping_style);
|
||
% fprintf('Post-FFE:');
|
||
% fprintf('My EQ: %.1e \n',post_ffe_results.metrics.BER);
|
||
% fprintf('Paper: %.1e \n \n',ber_in_paper);
|
||
|
||
end |