347 lines
13 KiB
Matlab
347 lines
13 KiB
Matlab
%%% Run parameters
|
|
% TX
|
|
|
|
function WDM_model(options)
|
|
|
|
arguments
|
|
options.num_channels = 16;
|
|
options.channel_spacing = 400e9;
|
|
options.fiber_length_km = 0;
|
|
options.rand_key = 1;
|
|
options.num_realiz = 1;
|
|
options.fwm_mitigation_technique = "co";
|
|
end
|
|
|
|
%%
|
|
|
|
% Add the imdd_simulation framework to the path
|
|
if ispc
|
|
addpath(genpath('C:\Users\Silas\Documents\MATLAB\imdd_simulation'));
|
|
else
|
|
% Linux path on the cluster
|
|
addpath(genpath('/work_beegfs/sutef391/imdd_simulation'));
|
|
end
|
|
|
|
% Quiet the ambiguous CET warning (best is to set TZ in sbatch; see below)
|
|
warning('off','MATLAB:datetime:AmbiguousTimeZone');
|
|
|
|
% How many workers?
|
|
cpus = str2double(getenv('SLURM_CPUS_PER_TASK'));
|
|
if ~isfinite(cpus) || cpus < 1, cpus = max(1, feature('numcores')); end
|
|
|
|
% Use a per-job, node-local JobStorageLocation to avoid stale locks on $HOME
|
|
% Prefer $TMPDIR if your cluster provides it, else tempdir().
|
|
tmpbase = getenv('TMPDIR');
|
|
if isempty(tmpbase), tmpbase = tempdir; end
|
|
jsl = fullfile(tmpbase, sprintf('matlab_jobstorage_%s_%s', ...
|
|
getenv('USER'), getenv('SLURM_JOB_ID')));
|
|
if ~exist(jsl,'dir'); mkdir(jsl); end
|
|
|
|
% Configure the local cluster explicitly and start the pool
|
|
c = parcluster('local');
|
|
c.NumWorkers = cpus;
|
|
c.JobStorageLocation = jsl;
|
|
|
|
p = gcp('nocreate');
|
|
if isempty(p) || p.NumWorkers ~= cpus
|
|
if ~isempty(p), delete(p); end
|
|
p = parpool(c, cpus); % avoids the “queued” state
|
|
end
|
|
fprintf('parpool up with %d workers; JobStorage=%s\n', p.NumWorkers, c.JobStorageLocation);
|
|
|
|
% result filename (timestamp + optional job id)
|
|
t = datetime('now','TimeZone','local','Format','yyyyMMdd_HHmmss');
|
|
jobid = getenv('SLURM_JOB_ID'); if isempty(jobid), jobid = 'nojid'; end
|
|
host = getenv('HOSTNAME'); if isempty(host), host = 'localhost'; end
|
|
|
|
% Output directory depends on platform
|
|
% create/ use folders foroptions.fiber_length_km, options.num_channels, options.channel_spacing.*1e-9, options.fwm_mitigation_technique
|
|
foldname = sprintf('%dkm_%dch_%dghz_%s', options.fiber_length_km(end), options.num_channels, options.channel_spacing.*1e-9, options.fwm_mitigation_technique);
|
|
if ispc
|
|
output_root = fullfile('C:\Users\Silas\Documents\MATLAB\Datensätze\FWM_2025\',foldname,'\');
|
|
else
|
|
output_root = fullfile('/work_beegfs/sutef391/results_WDM',foldname,'\');
|
|
end
|
|
if ~exist(output_root,'dir'), mkdir(output_root); end
|
|
|
|
% Build filename
|
|
t = datetime('now','TimeZone','local','Format','yyyyMMdd_HHmmss');
|
|
jobid = getenv('SLURM_JOB_ID'); if isempty(jobid), jobid = 'nojid'; end
|
|
host = getenv('HOSTNAME'); if isempty(host), host = 'localhost'; end
|
|
|
|
fname = sprintf('WDM_%s_%s_%s_%dkm_%dch_%dghz_%s.mat', char(t), host, jobid, options.fiber_length_km(end), options.num_channels, options.channel_spacing.*1e-9, options.fwm_mitigation_technique);
|
|
|
|
|
|
%%
|
|
s.num_realiz = options.num_realiz;
|
|
% s.wavelengthplan = calcWavelengthPlan(16,400e9,1310);
|
|
s.wavelengthplan = calcWavelengthPlan(options.num_channels,options.channel_spacing,1310);
|
|
% wavelengthplan = [1295,1305,1315,1325];
|
|
link_length = options.fiber_length_km;
|
|
s.pmd = 0.1;
|
|
s.gamma = 0.0023;
|
|
|
|
s.M = 4;
|
|
m = floor(log2(s.M)*10)/10;
|
|
fsym = 112e9;
|
|
fdac = 2*fsym;
|
|
fadc = 120000000000;
|
|
s.random_key = options.rand_key;
|
|
|
|
% Laser / s.Modulator
|
|
vbias_rel = 0.5;
|
|
u_pi = 4.6;
|
|
vbias = -vbias_rel*u_pi;
|
|
laser_linewidth = 0e6;
|
|
|
|
% EQ SETTINGS
|
|
vnle_order1 = 50;
|
|
vnle_order2 = 3;
|
|
vnle_order3 = 3;
|
|
vnle_order=[vnle_order1,vnle_order2,vnle_order3];
|
|
dfe_order = [0 0 0];
|
|
len_tr = 4096*2;
|
|
mu_ffe1 = 0.0001;
|
|
mu_ffe2 = 0.0008;
|
|
mu_ffe3 = 0.001;
|
|
mu_dc = 0.005;
|
|
% mu_dc = 0;
|
|
mu_ffe = [mu_ffe1 mu_ffe3 mu_ffe3];
|
|
mu_dfe = 0.0004;
|
|
|
|
%DB Stuff
|
|
db_precode = 0;
|
|
db_encode = 0;
|
|
duob_mode = db_mode.no_db;
|
|
apply_pulsef = 0;
|
|
|
|
rcalpha = 0.05;
|
|
Pform = Pulseformer("fsym",fsym,"fdac",4*fsym,"pulse","rc","pulselength",16,"alpha",rcalpha);
|
|
|
|
N = numel(s.wavelengthplan);
|
|
f_plan = physconst('lightspeed')./(s.wavelengthplan.*1e-9);
|
|
margin = 5e12; % some THz left and right
|
|
f_span = (max(f_plan)+margin)-(min(f_plan)-margin);
|
|
f_nyq = f_span/2;
|
|
kover = 4;
|
|
upsample_required = f_nyq./(fdac*kover/2);
|
|
upsample_pow = 2^nextpow2(upsample_required);
|
|
upsample_ceil = ceil(upsample_required);
|
|
|
|
s.f_opt = fdac*kover*upsample_pow;
|
|
s.f_opt_nyq = s.f_opt/2;
|
|
|
|
signal_cell = {};
|
|
Symbols = {};
|
|
Tx_bits = {};
|
|
|
|
s.rop = -12:0.75:-0.75;
|
|
|
|
output_ffe = cell(length(s.wavelengthplan),length(s.rop),s.num_realiz);
|
|
output_vnle = cell(length(s.wavelengthplan),length(s.rop),s.num_realiz);
|
|
output_mlse = cell(length(s.wavelengthplan),length(s.rop),s.num_realiz);
|
|
output_dbt = cell(length(s.wavelengthplan),length(s.rop),s.num_realiz);
|
|
|
|
s.p_launch = 3;
|
|
s.p = options.fwm_mitigation_technique;
|
|
switch s.p
|
|
case "co"
|
|
pol_rot = 100.*ones(1,length(s.wavelengthplan));
|
|
d_local = 0;
|
|
case "pair"
|
|
pol_rot = repmat([100,100,0,0],1,length(s.wavelengthplan)/4);
|
|
d_local = 0;
|
|
case "alt"
|
|
pol_rot = repmat([100,0,100,0],1,length(s.wavelengthplan)/4);
|
|
d_local = 0;
|
|
case "seg"
|
|
pol_rot = 100.*ones(1,length(s.wavelengthplan));
|
|
d_local = 3;
|
|
end
|
|
|
|
for realiz = 1:s.num_realiz
|
|
|
|
|
|
parfor l = 1:N
|
|
|
|
[Digi_sig,Symbols{l},Tx_bits{l}] = PAMsource(...
|
|
"fsym",fsym,"M",s.M,"order",18,"useprbs",0,...
|
|
"fs_out",fdac,...
|
|
"applyclipping",0,"clipfactor",1.5,...
|
|
"applypulseform",apply_pulsef,"pulseformer",Pform,...
|
|
"randkey",s.random_key+l+realiz,...
|
|
"db_precode",db_precode,"db_encode",db_encode,...
|
|
"mrds_code",0,"mrds_blocklength",512,"duobinary_mode",duob_mode).process();
|
|
|
|
% Digi_sig.spectrum("fignum",101,"displayname",'bla','normalizeTo0dB',0,'lambda0_nm',1310,'useWavelengthAxis',0);
|
|
Lp_awg = Filter('filtdegree',3,"f_cutoff",56e9,"fs",fdac*kover,"filterType",filtertypes.gaussian,"active",true);
|
|
El_sig = AWG("fdac",fdac,"f_cutoff",fsym,"lpf_active",1,"kover",kover,"bit_resolution",6,"upsampling_method","samplehold","precomp_sinc_rolloff",0,"H_lpf",Lp_awg,"dac_max",0.6,"dac_min",-0.6).process(Digi_sig);
|
|
% El_sig = s.M8199B("kover",kover).process(Digi_sig);
|
|
% El_sig.spectrum("fignum",101,"displayname",'bla','normalizeTo0dB',0,'lambda0_nm',1310,'useWavelengthAxis',0);
|
|
|
|
%%%%% Electrical Driver Amplifier %%%%%%
|
|
El_sig = El_sig.normalize("mode","oneone");
|
|
scaling = 0.6*(u_pi/2-abs(vbias-u_pi/2)); % scale to 60% of available modulator curve
|
|
El_sig = El_sig .* scaling;
|
|
|
|
% El_sig = El_sig.setPower(1,"dBm");
|
|
% figure;histogram(El_sig.signal);
|
|
|
|
%%%%% s.MODULATE E/O CONVERSION %%%%%
|
|
Eml_out = EML("mode",eml_mode.im_cosinus,"power",3,"fsimu",El_sig.fs,"lambda",s.wavelengthplan(l),"bias",vbias,"u_pi",u_pi,"linewidth",laser_linewidth,"randomkey",s.random_key+l+realiz).process(El_sig);
|
|
|
|
signal_cell{l} = Polarization_Controller("mode","rot_power","desired_power",pol_rot(l)).process(Eml_out);
|
|
end
|
|
|
|
Opt_sig_wdm = Optical_Multiplex("fs_in",fdac*kover,"fs_out",upsample_pow*fdac*kover,...
|
|
"lambda_center",1310,"random_key",0,"filtype",1,"B",120e9).process(signal_cell);
|
|
|
|
|
|
Opt_sig_wdm = Amplifier("amp_mode","ideal_no_noise","gain_mode","output_power","amplification_db",s.p_launch+10*log10(N)).process(Opt_sig_wdm);
|
|
|
|
% Opt_sig_wdm.spectrum("fignum",101,"displayname",'bla','normalizeTo0dB',0,'lambda0_nm',1310,'useWavelengthAxis',0);
|
|
|
|
% Opt_sig_wdm.spectrum("fignum",101,"displayname",'bla','normalizeTo0dB',1,'max_num_lines',2);
|
|
|
|
%%%%%% Fiber %%%%%%
|
|
Opt_sig_wdm_fib=Opt_sig_wdm;
|
|
|
|
segment_length = 1; % km
|
|
nSegments = link_length/segment_length;
|
|
zdw = 1310;
|
|
d_local = d_local; %if ~=0, simulation uses "segmented fiber with d+,d-)
|
|
randomize_D = true;
|
|
Dvec = getDispersionVector(nSegments, d_local, zdw, randomize_D, s.random_key+realiz);
|
|
propdist = 0;
|
|
for seg = 1:nSegments
|
|
|
|
Opt_sig_wdm_fib = DP_Fiber("L",segment_length,"D",Dvec(seg),"Dpmd",s.pmd,"Ds",0.07,...
|
|
"beat_len",10,"corr_len",100,"dz",1,"manakov",0,...
|
|
"gamma",s.gamma,"lambda",zdw,"n_waveplates",10,"SS_dphimax",0.01,...
|
|
"SS_dzmax",50,"SS_dzmin",10,"X_alpha",0.3,"X_beta",0,"rng",1).process(Opt_sig_wdm_fib);
|
|
|
|
|
|
propdist = segment_length;
|
|
|
|
|
|
|
|
end
|
|
|
|
%%%%%% Demux after 2 km %%%%%%
|
|
Opt_sig_wdm_demux = Optical_Demultiplex("attenuation",0,"B",200e9,"filtype",1,"fs_out",fdac*kover,"fs_in",fdac*kover*upsample_pow,"lambda_center",1310).process(Opt_sig_wdm_fib);
|
|
|
|
for ri = 1:length(s.rop)
|
|
|
|
parfor l = 1:N
|
|
|
|
%%%%%% ROP %%%%%%
|
|
Opt_sig_wdm_rx = Amplifier("amp_mode","ideal_no_noise","gain_mode","output_power","amplification_db",s.rop(ri)).process(Opt_sig_wdm_demux{l}); % rop+10*log10(N)
|
|
|
|
%%%%%% PD Square Law %%%%%%
|
|
assert(fdac*kover==Opt_sig_wdm_rx.fs,'Sampling Frequencies do not match! Check previous steps');
|
|
PD_sig = Photodiode("fsimu",fdac*kover,"dark_current",2e-08,"responsivity",1,"temperature",20,"nep",1.8e-11,"randomkey",s.random_key+l+realiz).process(Opt_sig_wdm_rx);
|
|
|
|
% PD_sig.spectrum("fignum",222,"displayname",'bla','normalizeTo0dB',1);
|
|
|
|
%%%%%% Low-pass RX (PD, El. Connectors and Scope %%%%%%
|
|
rx_bwl = 100e9;
|
|
PD_sig = Filter('filtdegree',4,"f_cutoff",rx_bwl,"fs",fdac*kover,"filterType",filtertypes.butterworth,"active",true).process(PD_sig);
|
|
|
|
% %%%%%% Low-pass Scope %%%%%%
|
|
Lp_scpe = Filter('filtdegree',4,"f_cutoff",80e9,"fs",fadc,"filterType",filtertypes.butterworth,"active",true);
|
|
|
|
%%%%%% Scope %%%%%%
|
|
Scpe_sig = Scope("fsimu",fdac*kover,"fadc",fadc,...
|
|
"delay",0,"fixed_delay",0,"filtertype",filtertypes.butterworth,...
|
|
"samplingdelay",0,"rand_samplingdelay",0,"freq_offset",0,"samp_jitter",0,...
|
|
"adcresolution",8,"quantbuffer",0.1,'block_dc',1,'lpf_active',0,'H_lpf',Lp_scpe).process(PD_sig);
|
|
|
|
Scpe_sig_2sps = Scpe_sig.resample("fs_out",2*fsym);
|
|
% Scpe_sig.spectrum("fignum",222,"displayname",'bla','normalizeTo0dB',1);
|
|
|
|
[~, Scpe_cell, ~, found_sync] = Scpe_sig_2sps.tsynch("reference", Symbols{l}, "fs_ref", fsym, "debug_plots", 1);
|
|
Rx_sig = Scpe_cell{1};
|
|
Rx_sig = Rx_sig.normalize("mode","rms");
|
|
|
|
|
|
|
|
% FFE
|
|
ffe_order = [50, 0, 0];
|
|
eq_ffe = EQ("Ne",ffe_order,"Nb",[0,0,0],"training_length",len_tr,"training_loops",5,"dd_loops",5,"K",2,"DCmu",mu_dc,"DDmu",[mu_ffe mu_dfe],"DFEmu",0.005,"FFEmu",0,"plotfinal",0,"ideal_dfe",0);
|
|
ffe_results = ffe(eq_ffe,s.M,Rx_sig,Symbols{l},Tx_bits{l},...
|
|
"precode_mode",duob_mode,...
|
|
'showAnalysis',0,...
|
|
"postFFE",[],...
|
|
"eth_style_symbol_mapping",0);
|
|
|
|
output_ffe{l,ri,realiz} = ffe_results;
|
|
|
|
|
|
|
|
%VNLE
|
|
pf_ncoeffs = 1;
|
|
ffe_order = [50, 5, 5];
|
|
eq_ = EQ("Ne",ffe_order,"Nb",dfe_order,"training_length",len_tr,"training_loops",5,"dd_loops",5,"K",2,"DCmu",mu_dc,"DDmu",[mu_ffe mu_dfe],"DFEmu",0.005,"FFEmu",0,"plotfinal",0,"ideal_dfe",1);
|
|
pf_ = Postfilter("ncoeff",pf_ncoeffs,"useBurg",1);
|
|
|
|
useviterbi = 0;
|
|
if useviterbi
|
|
mlse_ = MLSE_viterbi("duobinary_output",0,'M',s.M,'trellis_states',PAMmapper(s.M,0).levels);
|
|
else
|
|
mlse_ = MLSE("duobinary_output",0,'M',s.M,'trellis_states',PAMmapper(s.M,0).levels);
|
|
end
|
|
|
|
[vnle_results, mlse_results] = vnle_postfilter_mlse(eq_, pf_, mlse_, s.M, Rx_sig, Symbols{l},Tx_bits{l}, ...
|
|
"precode_mode", duob_mode,...
|
|
'showAnalysis', 0, ...
|
|
"postFFE", [],...
|
|
"eth_style_symbol_mapping", 0);
|
|
|
|
output_vnle{l,ri,realiz} = vnle_results;
|
|
output_mlse{l,ri,realiz} = mlse_results;
|
|
|
|
|
|
% DB tgt.
|
|
useviterbi = 0;
|
|
if useviterbi
|
|
mlse_db_ = MLSE_viterbi("duobinary_output",0,'M',s.M,'trellis_states',PAMmapper(s.M,0).levels);
|
|
else
|
|
mlse_db_ = MLSE("DIR",[1,1],"duobinary_output",0,"M",s.M,"trellis_states",PAMmapper(s.M,0).levels);
|
|
end
|
|
ffe_order = [50, 5, 5];
|
|
eq_ = EQ("Ne",ffe_order,"Nb",dfe_order,"training_length",len_tr,"training_loops",5,"dd_loops",5,"K",2,"DCmu",mu_dc,"DDmu",[mu_ffe mu_dfe],"DFEmu",0.005,"FFEmu",0,"plotfinal",0,"ideal_dfe",1);
|
|
|
|
dbt_results = duobinary_target(eq_, mlse_db_, s.M, Rx_sig, Symbols{l},Tx_bits{l}, ...
|
|
"precode_mode", duob_mode, ...
|
|
'showAnalysis', 0,...
|
|
"postFFE", []);
|
|
|
|
output_dbt{l,ri,realiz} = dbt_results;
|
|
|
|
end
|
|
|
|
end
|
|
|
|
res = struct();
|
|
res.settings = s;
|
|
res.ffe = output_ffe;
|
|
res.vnle = output_vnle;
|
|
res.mlse = output_mlse;
|
|
res.dbt = output_dbt;
|
|
|
|
%%%%%% Demux after final (10) km %%%%%%
|
|
|
|
|
|
|
|
% Save results
|
|
save(fullfile(output_root, fname), 'res', '-v7.3');
|
|
fprintf('Saved results to: %s\n', fullfile(output_root, fname));
|
|
disp(datetime('now','TimeZone','local','Format','yyyyMs.Mdd_HHmmss'));
|
|
|
|
|
|
end
|
|
end
|
|
|
|
|
|
|